Manufacturer: Kett – Japan
Powder Whiteness Tester C-130
THE DESCRIPTION OF POWDER WHITENESS TESTER C-130 – JAPAN
Powder Whiteness Tester C-130 – Kett measures the whiteness of various powders, such as starch, wheat, sugar, drugs and cement.
Powder Whiteness Tester C-130 is smaller and lighter than the conventional C-100. The amount of sample required for measurement has been reduced by redesigning the sample case.
Furthermore, sampling has been made easier. Less time needed for preparation and a shorter warm-up period sensitivity adjustment time at start-up results in faster measurements.
The use of LEDs for the light source means lower power consumption and internal heat.
Regular cleaning of the glass filter is necessary for accurate measurements. A redesigned filter section simplifies cleaning.
THE BENEITS OF POWDER WHITENESS TESTER C-130 – JAPAN
A compact and eco-friendly
The smaller than the previous model C-100, allow the Powder Whiteness Tester C-130 – Kett to have an electrical installation space of just half. The quantity of necessary product for the test sample is further reduced. The use of blue LED for the light source in addition to have a low power consumption.
The test is rapid and simple
The device is ready in just 20 seconds from power. To perform the test, simply put powder to sample platter. (1), Open the drawer and place the sample platter inside the drawer (2), completely close the drawer on the Powder Whiteness Tester C-130 (3) and the calibration curve number, the number of the measurement and whiteness value will be displayed automatically.
Automatic sensitivity adjustment
The sensitivity can be checked at any time thanks to the standard sample of reference, as supplied with the appliance. In the previous model C-100 sensitivity adjustment was performed before each measurement.
Now, with the Powder Whiteness Tester C-130, this is no longer necessary, since it is the same device to alert the operator when it is necessary to calibrate the machine. The operation is very simple: enter the reference standards into the sample and press the button to adjust the sensitivity.
Remove the tray and flip the power, clean the glass with the cloth and the special brush delivered as standard.
THE SPECIFICATION OF POWDER WHITENESS TESTER C-130 – JAPAN
Measurement method : Reflectivity measurement
Accepted samples : Various types of powder (Starch, Wheat flour, Tapioca flour, Cement etc.)
*(starch is the base calibration curve, but the user can set their own calibrations)
Measured item : Whiteness (Different from JIS definition)
Measurement range : 5.0-120.0
Resolution : 0.1
Display method : Fluorescent display tube
Functions : User calibration curve, sensitivity adjustment notification, average,
Usable temperature/humidity range : Temperature 5-40°C / Humidity 30-85% (non-condensing)
Light source : Blue LED
External output : RS-232C
Power source : AC 100V-120V (50/60Hz) or AC 200V-240V (50/60Hz)
Power consumption (maximum) : 16W (AC100V-120V / AC200-240V)
Power consumption (normal) : 4W (AC100V-120V / AC200-240V)
Dimensions : 375 (W) x 220 (D) x 250 (H) mm
Weight : 7.0kg
Optional Parts : Printer VZ-330, printer cable VZC-14
WHY SHOULD YOU CHOOSE TO BUY POWDER WHITENESS TESTER C-130 AT MAI HOA COMPANY?
Mai Hoa Company has technical support system in all 3 regions in Ha Noi, Da Nang, Ho Chi Minh City that have depth knowledge of equipment, and able to support provinces in the region.
Policy support and offers the best price.